Murata Manufacturing Co., Ltd. has introduced the BLM15HG_BH series of 0402 size (1.0×0.5mm) chip ferrite bead with guaranteed temperature use at 150°C for automotive powertrain safety applications. This product is scheduled to start mass production in October 2017. There has formerly been a guaranteed 125°C usage temperature product on the automotive market for noise suppression in the vicinity of mounted sensors, but the current product attains the 150°C guaranteed temperature usage needed by customers for high temperature applications. The use of a guaranteed 150°C product eliminates the need to avoid high temperature areas when installing, thereby granting greater freedom of…
Cypress Semiconductor Corp. yesterday announced it is sampling new devices in its Traveo™ automotive microcontroller (MCU) family that provides secure, high-speed networking for classic instrument cluster applications. The new MCUs support the Controller Area Network Flexible Data-rate (CAN FD) standard for high-speed, in-vehicle networking, allowing large amounts of data to be exchanged between each CAN node. Integrated enhanced Secure Hardware Extension (eSHE) support enables the devices to secure data on in-vehicle networks and prevent unauthorized connections to electronic control units (ECUs). The new MCUs offer advanced system features, high-quality sound and graphics, and can drive up to six traditional mechanical…
Taoglas announced the launch of Axiom, a reference design for a low-profile, compact multiple-antenna solution for the next generation of Connected Cars. The reference design will help automobile manufacturers overcome one of the biggest challenges of the Connected Car: where and how to place the multitude of antennas needed for maximum performance. As many as 18 antennas are needed to power the next-generation Connected Car. This includes multiple cellular antennas for network connectivity; Wi-Fi for hotspot connectivity; GNSS for navigation, emergency call systems and other location-based technologies; satellite radio; AM/FM antennas; radar antennas for object detection; Bluetooth antennas for smartphones…
Murata Manufacturing Co., Ltd., will be commercially producing the DLW32SH_XK series of 1210 inch size (3.2 x 2.5 mm) common mode choke coils capable of withstanding operating temperatures up to 125°C for the on-board control system interface CAN (Controller Area Network). Mass production of this product is scheduled to begin in July. Automobiles contain multiple electronic control units (ECU), and these ECUs exchange data with each other by means of the differential interface (CAN) for automobile control. Currently, 1812 inch size (4.5 x 3.2 mm) common mode choke coils, such as the DLW43SH series, are used for CAN. However, because…
Lantronix announced that it has joined the Industrial Internet Consortium® (IIC), the world’s leading organization in transforming business and society by accelerating the Industrial Internet of Things (IIoT). The research and advisory firm, Gartner, estimates the installed base of the IoT will exceed 20 billion units worldwide by 2020, with the McKinsey Global Institute estimating the economic potential of IoT to be as much as $11.1 trillion by 2025. This massive economic opportunity can only be realized if companies small and large can develop a new generation of technology solutions that will help them manage, operate, and service, connected products…
In a move to accelerate the launch of 5G wireless communications networks around the world, Taoglas, a leading provider of IoT and M2M antenna and RF solutions, unveiled its new series of 5G massive MIMO antenna arrays, designed to allow customers to provide the fastest and best user experiences for the next generation of wireless communications. The new antennas — including the Adaptrix CMM200.A, which features a patent-pending, modular interlocking system to help operators scale quickly to meet the speed and capacity demands of 5G — were demonstrated at Embedded World fair in Nuremberg, Germany. Wireless industry pundits have dubbed…
Lantronix, a global provider of secure data access and management solutions for Internet of Things (IoT) and information technology (IT) assets, provided an early preview of its xPico 200 family of embedded IoT gateways at the Embedded World Conference in Nürnberg, Germany. Measuring just 17mm by 25 mm, the xPico 200 family will deliver seamless and secure Ethernet, Wi-Fi and/or Bluetooth connectivity, enabling OEMs to go to market faster with their smart IoT solutions. xPico 200 series will feature advanced enterprise security, networking intelligence, and pre-integration with Lantronix’s MACH10 management software platform in a compact footprint that enables the functionality…
Non-volatile memory technology with extended temperature range (Compliant with AEC Q100) Fujitsu Electronics Europe has launched its new FRAM (ferroelectric RAM) solution MB85RS256TY. It is the first component of a completely new product group which is designed for an operating temperature of up to 125°C and is qualified according to the AEC Q100 industry standard, making it particularly suitable for use in the automotive sector. With the new series, Fujitsu wants to serve various applications in the automotive market and support innovative projects. The ever increasing demand from the automotive industry for electronic control systems, which access a wide variety…
You are interested in the latest developments from the world of the Internet of Things and would like to establish new contacts? Then you are in the right place at embedded world! We are glad to present you embedded solutions for industrial, automotive, IoT and energy efficiency systems on the Embedded World trade fair in Nuremberg. Come and visit our partner’s stand: Fujitsu Electronics Europe GmbH (Hall 2 / 2-110). Overview: ASSP SoC customized according to market demands; non-volatile memory (FeRAM and ReRAM) advantages in wearable and industrial electronics; creating automotive HMI using Graphics Display Controllers (GDC) and System on Chip…
Lantronix introduced MACH10, a multi-dimensional management software platform designed to enable OEMs (original equipment manufacturers) to profitably deliver web-scale IoT applications and services. Featuring extensible, ready-to-use management applications and a suite of essential micro-services available through industry-standard APIs, MACH10 is a cloud agnostic, hybrid platform that allows OEMs and their partners to deliver secure data access and management software and services to support their connected machines and their customers. “With more than two decades of experience as an OEM providing robust connectivity solutions to thousands of manufacturers building connected products, Lantronix has firsthand insight into the unmet needs of IoT…
Supercapacitors have over a hundred times the capacity of ceramic capacitors and electrolytic capacitors, and as a storage device they have a longer working life than ordinary secondary batteries. Murata supercapacitors are small in size while having world-leading low ESR. By using the capacitor for peak power assist in small electronics, the product contributes to increased output and power stability as well as functional improvement of the device. The currently launched DMH Series accommodates use in limited space, and it is ideal for use in various wearable devices, mobile electronics, smart cards, electronic paper devices, and similar applications. The supercapacitor’s…
Taoglas, a leading provider of IoT and M2M antenna solutions, has developed a range of Ultra-Wide Band (UWB) antennas, offering more practical and easily integrated solutions than ever before. The UWB spectrum spans multiple GHz of frequency bandwidth which is in stark contrast to current and historical narrow band communications systems such as Cellular, Wi-Fi and GNSS. This means that not only the approach has to be different at system level, but also advanced antennas have to be designed and utilized. Taoglas has developed various innovative and new-to-the-market antennas designed for seamless integration, using simple adhesive and highly flexible micro-coaxial…
New Solution Combines Cypress’s HyperFlash™ and HyperRAM™ Memories Based on the High-Bandwidth, Low-Pin-Count HyperBus™ Interface Cypress Semiconductor Corp. announced the qualification of a small-footprint memory solution that enables instant-on applications. The solution contains Cypress’s 3V 512-Mbit HyperFlash™ and 64-Mbit HyperRAM™ memories in a multi-chip package (MCP) measuring only 8-mm by 6-mm. The Cypress HyperFlash and HyperRAM MCP combines a high-speed NOR flash memory for fast-boot, instant-on capability with a self-refresh DRAM for expanded scratchpad memory in a low-pin-count package for space-constrained and cost-optimized embedded designs. The solution is ideal for a wide range of applications, including automotive clusters and infotainment…
We are pleased to announce that our company will participate in the exhibition Electronica 2016, among other 2913 exhibitors from 50 countries. We are waiting for you November 08-11 in Munich at the stand 107 (Hall B5). Come and see cutting edge products that contribute to the future of smart living. Sensors, wireless communication modules and power solutions for smart homes, lighting, automotive and healthcare purposes will be showcasing.
Cypress Semiconductor Corp. announced a new addition to its Traveo™ automotive microcontroller family with more memory for program code and graphics to support hybrid instrument cluster applications. The new, highly integrated devices in the S6J32xE series provide a single-chip solution that can drive graphics on head-up displays or traditional gauges, but also provides scalability with Cypress’s low-pin-count HyperBus™ memory interface. The addition continues Cypress’s expansion of its broad automotive portfolio that delivers differentiating performance via its MCUs, memories, wireless radios, capacitive-touch solutions, Power Management ICs (PMICs) and other technologies. The Traveo S6J32xE series features up to 4MB of high-density embedded…
Fujitsu Semiconductor Ltd. announced the development of MB85RQ4ML, its new FRAM product with 4 Mbit of memory, which represents the highest density in the non-volatile RAM market with a quad SPI interface, and has the highest data transfer rate in Fujitsu’s FRAM product line. The new product is available in sample quantities starting today. Its high-speed operation and non-volatile memory make it ideal for use in the networking, RAID controller, and industrial computing fields. Leveraging FRAM’s non-volatility, high-speed read/write cycles, high read/write endurance, and low power consumption, Fujitsu Semiconductor has been proposing batteryless solutions using FRAM for the wearables market…
Excelitas Technologies Corp. a global technology leader focused on delivering innovative, customized photonic solutions, introduces OmniCure® AC9 UV LED Curing Systems for the curing of inks, adhesives and coatings. The OmniCure AC9 UV LED Systems’ innovative design features a high-performing, small form-factor, air-cooled solution to enable faster line speeds in industrial manufacturing and printing. The OmniCure AC9150, AC9150P, AC9225, AC9225P, AC9300 and AC9300P UV LED curing systems have advanced front-end optics to provide high power, high peak irradiance and exceptional uniformity. The OmniCure AC9 UV LED Curing Systems deliver over 14 W/cm2 peak irradiance for fast curing at different working…
In February 23-25 this year in Nuremberg (Germany) will take place next Embedded World exhibition, which will showcase state-of-the-art electronic solutions for all industries needs. Elecomp Co. LTD together with our partner Lantronix Inc. will be happy to meet you at Booth #5-541, where we can discuss current challenges and the best ways to solve them. Overview: Lantronix Wi-Fi modules for high performance Enterprise IoT latest Cypress technologies for Automotive, Wearables, and IoT Murata latest RFID & MEMS sensors latest Fujitsu developments from the world of IT security for electronic systems, distributed intelligence and the Internet of Things
This device collects and sends information to a home router or through a main controller unit (when plugged in to any power home socket). The main controller unit holds the information about the time spent as switched on and switched off, real power consumption, alarm lighting, smart light switch-off if nobody is at home etc. “Zero power consumption and small dimensions based on COB technology of chipset. If you are a consumer, the main question for you would be this: how I can trust different manufacturers of LED lamps if they announce same characteristics of their product as power consumption,…
Murata has announced the NCS3 series of isolated 3 watt DC-DC converters manufactured by Murata Power Solutions. These through-hole mounting converters are packaged in an industry standard, pin compatible, SIP format, making them ideal as a replacement part when updating older product designs. Accommodating a wide 4:1 input voltage range around either a 12 VDC or 48 VDC nominal, the NCS3 series comprises eight single-output regulated models providing a choice of 3.3, 5, 12, or 15 VDC output. The wide input voltage suits applications where the nominal input voltage might be different, or where wide voltage deviations are anticipated. Output…
Machina Research, the world’s leading provider of strategic market intelligence on M2M and the Internet of Things published its annual guidance on the size of the M2M market opportunity The key findings are as follows: The total number of M2M connections will grow from 5 billion in 2014 to 27 billion in 2024, a CAGR of 18%. Today 72% of all M2M connections are connected using a short range technology (e.g. WiFi, Zigbee, or in-building PLC), by 2024 that will have declined to 69%. The big short-range applications, which cause it to be the dominant technology category, are Consumer Electronics,…
Murata Manufacturing Co., Ltd. has introduced the BLM15HG_BH series of 0402 size (1.0×0.5mm) chip ferrite bead with guaranteed temperature use at 150°C for automotive powertrain safety applications. This product is scheduled to start mass production in October 2017. There has formerly been a guaranteed 125°C usage temperature product on the automotive market for noise suppression in the vicinity of mounted sensors, but the current product attains the 150°C guaranteed temperature usage needed by customers for high temperature applications. The use of a guaranteed 150°C product eliminates the need to avoid high temperature areas when installing, thereby granting greater freedom of…
Cypress Semiconductor Corp. yesterday announced it is sampling new devices in its Traveo™ automotive microcontroller (MCU) family that provides secure, high-speed networking for classic instrument cluster applications. The new MCUs support the Controller Area Network Flexible Data-rate (CAN FD) standard for high-speed, in-vehicle networking, allowing large amounts of data to be exchanged between each CAN node. Integrated enhanced Secure Hardware Extension (eSHE) support enables the devices to secure data on in-vehicle networks and prevent unauthorized connections to electronic control units (ECUs). The new MCUs offer advanced system features, high-quality sound and graphics, and can drive up to six traditional mechanical…
Taoglas announced the launch of Axiom, a reference design for a low-profile, compact multiple-antenna solution for the next generation of Connected Cars. The reference design will help automobile manufacturers overcome one of the biggest challenges of the Connected Car: where and how to place the multitude of antennas needed for maximum performance. As many as 18 antennas are needed to power the next-generation Connected Car. This includes multiple cellular antennas for network connectivity; Wi-Fi for hotspot connectivity; GNSS for navigation, emergency call systems and other location-based technologies; satellite radio; AM/FM antennas; radar antennas for object detection; Bluetooth antennas for smartphones…
Murata Manufacturing Co., Ltd., will be commercially producing the DLW32SH_XK series of 1210 inch size (3.2 x 2.5 mm) common mode choke coils capable of withstanding operating temperatures up to 125°C for the on-board control system interface CAN (Controller Area Network). Mass production of this product is scheduled to begin in July. Automobiles contain multiple electronic control units (ECU), and these ECUs exchange data with each other by means of the differential interface (CAN) for automobile control. Currently, 1812 inch size (4.5 x 3.2 mm) common mode choke coils, such as the DLW43SH series, are used for CAN. However, because…
Lantronix announced that it has joined the Industrial Internet Consortium® (IIC), the world’s leading organization in transforming business and society by accelerating the Industrial Internet of Things (IIoT). The research and advisory firm, Gartner, estimates the installed base of the IoT will exceed 20 billion units worldwide by 2020, with the McKinsey Global Institute estimating the economic potential of IoT to be as much as $11.1 trillion by 2025. This massive economic opportunity can only be realized if companies small and large can develop a new generation of technology solutions that will help them manage, operate, and service, connected products…
In a move to accelerate the launch of 5G wireless communications networks around the world, Taoglas, a leading provider of IoT and M2M antenna and RF solutions, unveiled its new series of 5G massive MIMO antenna arrays, designed to allow customers to provide the fastest and best user experiences for the next generation of wireless communications. The new antennas — including the Adaptrix CMM200.A, which features a patent-pending, modular interlocking system to help operators scale quickly to meet the speed and capacity demands of 5G — were demonstrated at Embedded World fair in Nuremberg, Germany. Wireless industry pundits have dubbed…
Lantronix, a global provider of secure data access and management solutions for Internet of Things (IoT) and information technology (IT) assets, provided an early preview of its xPico 200 family of embedded IoT gateways at the Embedded World Conference in Nürnberg, Germany. Measuring just 17mm by 25 mm, the xPico 200 family will deliver seamless and secure Ethernet, Wi-Fi and/or Bluetooth connectivity, enabling OEMs to go to market faster with their smart IoT solutions. xPico 200 series will feature advanced enterprise security, networking intelligence, and pre-integration with Lantronix’s MACH10 management software platform in a compact footprint that enables the functionality…
Non-volatile memory technology with extended temperature range (Compliant with AEC Q100) Fujitsu Electronics Europe has launched its new FRAM (ferroelectric RAM) solution MB85RS256TY. It is the first component of a completely new product group which is designed for an operating temperature of up to 125°C and is qualified according to the AEC Q100 industry standard, making it particularly suitable for use in the automotive sector. With the new series, Fujitsu wants to serve various applications in the automotive market and support innovative projects. The ever increasing demand from the automotive industry for electronic control systems, which access a wide variety…
You are interested in the latest developments from the world of the Internet of Things and would like to establish new contacts? Then you are in the right place at embedded world! We are glad to present you embedded solutions for industrial, automotive, IoT and energy efficiency systems on the Embedded World trade fair in Nuremberg. Come and visit our partner’s stand: Fujitsu Electronics Europe GmbH (Hall 2 / 2-110). Overview: ASSP SoC customized according to market demands; non-volatile memory (FeRAM and ReRAM) advantages in wearable and industrial electronics; creating automotive HMI using Graphics Display Controllers (GDC) and System on Chip…
Lantronix introduced MACH10, a multi-dimensional management software platform designed to enable OEMs (original equipment manufacturers) to profitably deliver web-scale IoT applications and services. Featuring extensible, ready-to-use management applications and a suite of essential micro-services available through industry-standard APIs, MACH10 is a cloud agnostic, hybrid platform that allows OEMs and their partners to deliver secure data access and management software and services to support their connected machines and their customers. “With more than two decades of experience as an OEM providing robust connectivity solutions to thousands of manufacturers building connected products, Lantronix has firsthand insight into the unmet needs of IoT…
Supercapacitors have over a hundred times the capacity of ceramic capacitors and electrolytic capacitors, and as a storage device they have a longer working life than ordinary secondary batteries. Murata supercapacitors are small in size while having world-leading low ESR. By using the capacitor for peak power assist in small electronics, the product contributes to increased output and power stability as well as functional improvement of the device. The currently launched DMH Series accommodates use in limited space, and it is ideal for use in various wearable devices, mobile electronics, smart cards, electronic paper devices, and similar applications. The supercapacitor’s…
Taoglas, a leading provider of IoT and M2M antenna solutions, has developed a range of Ultra-Wide Band (UWB) antennas, offering more practical and easily integrated solutions than ever before. The UWB spectrum spans multiple GHz of frequency bandwidth which is in stark contrast to current and historical narrow band communications systems such as Cellular, Wi-Fi and GNSS. This means that not only the approach has to be different at system level, but also advanced antennas have to be designed and utilized. Taoglas has developed various innovative and new-to-the-market antennas designed for seamless integration, using simple adhesive and highly flexible micro-coaxial…
New Solution Combines Cypress’s HyperFlash™ and HyperRAM™ Memories Based on the High-Bandwidth, Low-Pin-Count HyperBus™ Interface Cypress Semiconductor Corp. announced the qualification of a small-footprint memory solution that enables instant-on applications. The solution contains Cypress’s 3V 512-Mbit HyperFlash™ and 64-Mbit HyperRAM™ memories in a multi-chip package (MCP) measuring only 8-mm by 6-mm. The Cypress HyperFlash and HyperRAM MCP combines a high-speed NOR flash memory for fast-boot, instant-on capability with a self-refresh DRAM for expanded scratchpad memory in a low-pin-count package for space-constrained and cost-optimized embedded designs. The solution is ideal for a wide range of applications, including automotive clusters and infotainment…
We are pleased to announce that our company will participate in the exhibition Electronica 2016, among other 2913 exhibitors from 50 countries. We are waiting for you November 08-11 in Munich at the stand 107 (Hall B5). Come and see cutting edge products that contribute to the future of smart living. Sensors, wireless communication modules and power solutions for smart homes, lighting, automotive and healthcare purposes will be showcasing.
Taoglas USA, Inc, the leading provider of antenna solutions to the M2M and connected device market, is first to provide an entire product line that contains an antenna diagnostic compatibility feature within its cellular antennas for M2M devices. Called AntD©, this solution enables M2M device manufacturers to detect if an antenna is connected or not and informs device owners if an antenna or transmission line has been damaged or is no longer working. This is critical for M2M devices in remote areas, devices in danger of being vandalized or for customer-care, trouble-shooting situations. Taoglas’ Antenna Diagnostics capability, AntD will initially…
Cypress Semiconductor Corp. announced a new addition to its Traveo™ automotive microcontroller family with more memory for program code and graphics to support hybrid instrument cluster applications. The new, highly integrated devices in the S6J32xE series provide a single-chip solution that can drive graphics on head-up displays or traditional gauges, but also provides scalability with Cypress’s low-pin-count HyperBus™ memory interface. The addition continues Cypress’s expansion of its broad automotive portfolio that delivers differentiating performance via its MCUs, memories, wireless radios, capacitive-touch solutions, Power Management ICs (PMICs) and other technologies. The Traveo S6J32xE series features up to 4MB of high-density embedded…
Fujitsu Semiconductor Ltd. announced the development of MB85RQ4ML, its new FRAM product with 4 Mbit of memory, which represents the highest density in the non-volatile RAM market with a quad SPI interface, and has the highest data transfer rate in Fujitsu’s FRAM product line. The new product is available in sample quantities starting today. Its high-speed operation and non-volatile memory make it ideal for use in the networking, RAID controller, and industrial computing fields. Leveraging FRAM’s non-volatility, high-speed read/write cycles, high read/write endurance, and low power consumption, Fujitsu Semiconductor has been proposing batteryless solutions using FRAM for the wearables market…
Excelitas Technologies Corp. a global technology leader focused on delivering innovative, customized photonic solutions, introduces OmniCure® AC9 UV LED Curing Systems for the curing of inks, adhesives and coatings. The OmniCure AC9 UV LED Systems’ innovative design features a high-performing, small form-factor, air-cooled solution to enable faster line speeds in industrial manufacturing and printing. The OmniCure AC9150, AC9150P, AC9225, AC9225P, AC9300 and AC9300P UV LED curing systems have advanced front-end optics to provide high power, high peak irradiance and exceptional uniformity. The OmniCure AC9 UV LED Curing Systems deliver over 14 W/cm2 peak irradiance for fast curing at different working…
In February 23-25 this year in Nuremberg (Germany) will take place next Embedded World exhibition, which will showcase state-of-the-art electronic solutions for all industries needs. Elecomp Co. LTD together with our partner Lantronix Inc. will be happy to meet you at Booth #5-541, where we can discuss current challenges and the best ways to solve them. Overview: Lantronix Wi-Fi modules for high performance Enterprise IoT latest Cypress technologies for Automotive, Wearables, and IoT Murata latest RFID & MEMS sensors latest Fujitsu developments from the world of IT security for electronic systems, distributed intelligence and the Internet of Things
This device collects and sends information to a home router or through a main controller unit (when plugged in to any power home socket). The main controller unit holds the information about the time spent as switched on and switched off, real power consumption, alarm lighting, smart light switch-off if nobody is at home etc. “Zero power consumption and small dimensions based on COB technology of chipset. If you are a consumer, the main question for you would be this: how I can trust different manufacturers of LED lamps if they announce same characteristics of their product as power consumption,…
Murata has announced the NCS3 series of isolated 3 watt DC-DC converters manufactured by Murata Power Solutions. These through-hole mounting converters are packaged in an industry standard, pin compatible, SIP format, making them ideal as a replacement part when updating older product designs. Accommodating a wide 4:1 input voltage range around either a 12 VDC or 48 VDC nominal, the NCS3 series comprises eight single-output regulated models providing a choice of 3.3, 5, 12, or 15 VDC output. The wide input voltage suits applications where the nominal input voltage might be different, or where wide voltage deviations are anticipated. Output…
Machina Research, the world’s leading provider of strategic market intelligence on M2M and the Internet of Things published its annual guidance on the size of the M2M market opportunity The key findings are as follows: The total number of M2M connections will grow from 5 billion in 2014 to 27 billion in 2024, a CAGR of 18%. Today 72% of all M2M connections are connected using a short range technology (e.g. WiFi, Zigbee, or in-building PLC), by 2024 that will have declined to 69%. The big short-range applications, which cause it to be the dominant technology category, are Consumer Electronics,…